Altenew Academy: Beyond Basic Backgrounds

Hello crafty friends! Today I’m sharing a card that I made after participating in Altenew Academy’s Beyond Basic Backgrounds class. I was inspired by the additional card project that was shown for lesson 1. In the first lesson, the instructor Lydia made a stencil by diecutting multiples of the same flower die from a piece…

Altenew Academy: Level 1 Final Challenge

Hello crafty friends! This was definitely what it was supposed to be – a challenge! Of course I may have overthought it, but I guess we shall see! I am participating in the Altenew Educator Certification program. You may have seen some of my posts as I worked through the Level 1 courses. After completing…

Altenew Academy: Irresistible Inking Techniques

Hello crafty friends! Today I’m sharing a card that I made after participating in Altenew Academy’s Irresistible Inking Techniques class. I was inspired by the lesson on using an acrylic block as a background stamp. I had never tried that before. I happened to have a round acrylic block, and I thought that would be…

ScrappyShak Design Team: Pink and Main Scratch-Off Gender Reveal

Hello crafty friends! Today, I’m sharing this card that I made for a ScrappyShak Design Team challenge. The challenge was to use any of the Pink and Main Scratch-Off stickers or sticker sheets. I came up with this idea for a gender reveal card that did not involve pyrotechnics. No person or animal was hurt…

ScrappyShak Design Team: Tim Holtz Blossom

Hello crafty friends! Today, I’m sharing this card that I made for the ScrappyShak Design Team. I’m not gonna lie, it took me a couple days or three to finish this, so don’t think I just sit down and this happens! 🙂 There’s lots of try this and maybe that, with some good old prying…

ScrappyShak Design Team: HBD with Celebrate Colorize

Hello crafty friends! I wanted to share this card that I made for the ScrappyShak Design Team. I was inspired by the Sizzix Celebrate Colorize die set by Tim Holtz. And, it just so happens to be my hubby’s birthday next week! SHHHH! Don’t tell…. it’s a surprise! After picking the die set, and the…

Altenew Academy: Easy Die Cutting Techniques

Hello crafty friends! Today I’m sharing a card that I made after participating in Altenew Academy’s Easy Die Cutting Techniques class. I was inspired by the technique of inlaying a die cut into another piece of paper. This course also taught the technique of using a die cut for dry embossing. I didn’t have an…

ScrappyShak Design Team: DIY 3D Woodland Animal Kit

Hello crafty friends! I wanted to share this project that I made for the ScrappyShak Design Team. My Design Team friends and I were asked to make something with a potential new product line that Melanie, the owner, was exploring. The products are these adorable Woodland Animals that are laser cut out of Bass Wood.…

ScrappyShak Design Team: My Bunny Valentine

Hello crafty friends! OOPSIE! I wanted to share this card that I made for the ScrappyShak Design Team BEFORE Valentine’s Day, but I just found this post hanging out in my Drafts folder… I had shared on Social Media, but forgot to finish my blog post! It stinks getting old, that’s for sure! The idea…


Something went wrong. Please refresh the page and/or try again.

ScrappyShak Design Team!

July 13, 2022

I am absolutely thrilled to announce that I have been selected to participate in the very first Design Team for ScrappyShak! I have the honor of working with the owner, Melanie, and a fabulous and talented group of women. You can check out the whole Design Team here. This is my first experience being part of a design team, and I hope that I can inspire just one more person to take a leap of faith into letting their artistic juices start to flow! I feel like I’m relatively new to this arena, and would like to honestly share my journey, complete with successes, failures, and tips I’ve picked up along the way. I’m excited to expand my repertoire beyond the world of Tim Holtz, but you’ll probably see a lot of his products here as I continue to discover other brands and styles. I would love to hear your feedback, so please feel free to leave a comment or drop me an email.

The first assignment for the Design Team was to use the Sizzix Shaker Panes line, products 665451 (hearts), 665448 (circles), and 665452 (squares). There are really neat framelit dies available that are sized to work with these sets, products 665661 (hearts), 665660 (circles), and 665662 (squares). There are three different sizes in each set, so you can be sure to find one that fits your project. The framelits make these so easy to use! I took the photo below after I had used one of each shape, but they do come with three different sizes in each package. They are available at ScrappyShak, and I will attempt to include links at the bottom of this post. If you click through on any of the product links, I will earn a small commission from your purchase, at no additional cost to you. I appreciate your support. Everything I earn will be used to support my ability to continue to create and share with you!

The shaker panes have adhesive on both sides, and Sizzix includes a heat resistant acetate top sheet that you can emboss on! Don’t forget to remove the protective film that keeps the top sheet clean and scratch free until you’re ready to use it, and make sure to remove any cat or dog hairs before you seal up your shaker pane! (speaking from experience).

We were told that we could use either of the shapes in our design. After I had gone down the “square” road, I was thinking, “I have a great idea for the circle”! Well, then of course I felt I needed to do something with the heart, not wanting the heart to feel left out. That would just be sad. I’ll have to say, hearts aren’t my favorite shape. It’s probably and old counterproductive brain pattern from an ex-boyfriend in high school, but by now I was determined to use all three shapes, including the heart.

I started by choosing a die to work with, Tim Holtz’s Brushstroke Butterflies. Then I picked a bunch of colors I thought would go together: Saltwater Taffy, Orange Marmalade, and Fossilized Amber. I used the smoosh – dry – smoosh – dry – repeat technique on my craft mat with Distress watercolor cardstock to create some colored paper to work with.

I cut out my butterflies, then decided I was a little too heavy handed on my smooshing and coloring with the Saltwater Taffy. I went a little lighter on a new piece of paper, and added some Scattered Straw, and was happier with that. I saved my extra colored paper panels, and ended up using them later on the heart shaker card. Sometimes it takes me a bit to figure out colors, but I usually save the paper that I don’t end up using on the current project for something else. If they sit on my desk for too long, they usually end up in the “circular file”, but hey, it’s only paper! This time it worked out great, because as I went along, I decided to use the same general design and colors for each of the three cards that I ended up making for this project, so I pretty much used up all my extras. Here’s a great resource for you: My new crafty friend and fellow Design Team member, Tracy Fear, created a color wheel for the Distress colors! You can visit her account on Etsy and get one!

After I put my butterflies together, I moved on to thinking about the card front background. When I layed out the butterfles and the medium square shaker pane, I thought it would look better as a 5×7 card, as opposed to an A2 sized card, which I usually make. I tried both the large and the small shaker panes as well, but the medium size let me fit the butterflies where I wanted them on the 5×7 sized card. I wanted to add something to the background for interest and balance, but I didn’t want it to overshadow the butterflies or the shaker element. I thought dry embossing on white cardstock would be nice, but I didn’t have any embossing folders or stencils that would work on a 5×7 card. So I started with a piece of Distress watercolor paper, cut down to 4.75×6.75, so I could layer it against a solid color card base, and house the shaker pane in between. Here’s something I might have done differntly – I tend to layer my card front with 1/8 inch, all the way around. This works out great, in my opinion, on an A2 card. I don’t make as many 5×7 cards. This 1/8 inch border just felt a little too narrow for me. Next time, I might layer with a 1/4 inch edge. I’ll definitely try both. But I didn’t figure this out until I was done with the second card, and figured I would just go with it! We are our own biggest critics!

Looking through my stamps, I decided to use the new Floral Elements stamp (CMS445). I picked out all of the leafy stamps, and used my Misti stamp platform to stamp the smooth side of my cardstock with Twisted Citron. Since it was looking kinda sparse, I used a couple of my favorite stamps from that set to fill in where I wanted more elements, using an acrylic block to stamp more leaf images.

I thought about lightly spritzing this with water before I stamped, but I chose not to, because I wasn’t sure I could get them to all look similar, with some being stamped with my Misti, and some by hand. When I made the circle Goldfish card with the Bubbles stamp, I did mist it very lightly with water before I stamped, and I just love how that one came out. When the background was how I wanted it, I played around with where I wanted to place my butterflies, shaker pane, and a sentiment. For the sentiments on all the cards, I chose the Noteworthy stamp set, CMS 446, and simply stamped the sentiment directly on to my background once I figured out where everything should go. Be sure to do all of your stamping before you add the shaker pane, otherwise it’s a lot more difficult to stamp. I hadn’t yet decided on a color to use for the body of the butterflies. I wanted something softer than black. I tried a couple different browns, and picked Brushed Corduroy, because it seemed to look good with the colors I was using. I decided to use Brushed Corduroy as the base layer for my card to tie it in more. The Brushed Corduroy was ink blended just around the outside of the base for the card, as I wanted it to be white behind the shaker pane window. I began thinking that a plain brown card base might be a bit too plain and brown, and not really go with the sparkly shaker element. I decided to add some gold splatter, using a very pretty Nuvo Mica Mist spray in Aspen Gold. I also added that to where the background of the shaker pane would be. Again, trying to connect the elements of the card so they feel like they belong. It’s like when someone makes a dish on Chopped, and the judges point out one of the basket ingredients is just thrown on the plate and not integrated into the dish. We don’t want that!

The easiest part of this card was adding the shaker element. The dies work perfectly to cut out a window for the shaker pane, and a frame to either highlight the shaker pane if you put the pane in the backside of your paper, or cover up the edge if you put your frame the frontside of your paper. You can do it either way; whatever seems to work for your design. I wanted the front of my card flat, so I could overlap the butterflies a little over the shaker window, so I put the shaker pane in back of my background, on top of my card base. Since the shaker pane is nice and beefy, you can add lots of shakety bits, beads, and charms. I went through my stash to pick colors that would match. I thought about putting something else in the shaker pane, but I didn’t have anything on hand. I used a combination of sequins and small beads, most of which were painstakingly chosen, one by one, because that’s how I roll!

I used Bearly Art Precision Craft Glue with a precision tip to glue on the shaker pane frame and butterflies. The shaker pane comes with it’s own adhesive – just pull off the backing and you’re good to go. It couldn’t be easier. To layer the front of the card onto the base, I used Scrapbook Adhesive double sided tape roll. Since the shaker is 1/8 inch thick, you need to use two layers of the mounting tape. Supposedly, the easy way to do this is to measure or eyeball how much tape you need, then fold it over on itself, sticky side to sticky side, to get an even double layer of tape, then cut it off the roll. It worked better for me to make two shorter pieces for the long sides of the card, instead of one long piece. It was easier to handle. I might go back to putting one layer of mounting tape down perfectly, then adding the second layer of tape on top of that. Folding the tape on itself is not very forgiving, and kind of awkward. Oh, and no, I don’t do my nails like a lot of the people who blog about cards. I have chickens, and I like to do outdoorsy things, and play in the dirt.

My favorite way to attach a base to a blank card is to use my Scotch ATG 700 tape runner, back from the olden days of scrapbooking. I just love that tool. I’m sure the newer tape runners are more affordable, but that thing just feels right in my hand! Here’s the finished card. I hope you heard me say how easy these shaker panes from Sizzix are to use!

Sizzix Shaker Panes 665452, Brushstroke Butterflies, Floral Elements

Here are the other two cards I made for this project. I used the Sizzix circle Shaker Pane with a stamp and die set from Altenew (Goldfish Pond), along with the amazing new Stamper’s Anonymous Tim Holtz Bubbles (CMS449). I used the same process as described above, using Saltwater Taffy and Twisted Citron for the lilypads, Orange Marmalade, Ripe Persimmon, Fossilized Amber for the fish, and Tumbled Glass for the background and frame. The sentiment from Noteworthy was stamped with Prize Ribbon.

Sizzix Shaker Panes 665448, Altenew Goldfish Pond, Tim Holtz Bubbles CMS449

For the last card using the heart shaker pane, I used Spellbinder’s Simply Perfect Layered Blooms. No, it’s not perfect! Much patience was needed to put together the tiny little pieces with these old eyes, but I did use up all of my leftover papers. The background is stamped with Altenew’s Pattern Play Diamond set. Thanks again for stopping by, and please come back soon. I appreciate you!

Sizzix Shaker Panes 665451, Spellbinders Simply Perfect Layered Blooms, Altenew Pattern Play Diamond

Follow My Blog

Get new content delivered directly to your inbox.